Cocking aid
Cocking aid / cranking mechanisms are sold by various manufacturers in both integrated and “attachable” (add-on) variants. As a rule, the crossbow can then be cocked more easily, or even while seated, via a built-in gear mechanism. The cranking mechanism has become of critical importance with the “shooting machines” of the compound crossbow category. Large compound cams, used to achieve peak arrow speeds while maintaining a compact bow assembly - as found on, for example, Stryker or the PSE TAC 15 - mandatorily require a full cranking system paired with a movable slider that catches the string, holds it in the cocked position, and releases it through the trigger. The downside: cocking time typically runs up to 1.5 minutes. The oversized cams on these two crossbow types are particularly sensitive to vertical string movement during the cocking process. Even the slightest deviation – for instance, a minor upward shift – causes the string to jump out of the cams, rendering the crossbow unusable or, at best, requiring a press to reseat it. With somewhat smaller cams and a larger bow assembly, comparable or identical speeds are achieved with similar arrows (e.g. the Darton Lightning). The system is more robust as a result: it can be cocked by hand or with a rope cocking aid, and the cocking time is approximately 4 seconds. That said, the market has changed considerably over the past three to four years. TenPoint’s ACU Draw, ACU Draw Pro, and ACU Slide, as well as Excalibur’s Charger Ext Crank, have evolved into modern, fast, quiet, and safe cranking systems.